Power quality testing

Probe 100 Plus power line monitor

The P100+ Datalogger will detect all of the important types of power problems, and will Latch an LED to show them. 

Although the P100+ does not store the disturbance information internally, it does broadcast all data about the disturbances through the RS232 serial port as they are detected, as well as the voltage reading every second.
You can connect your PC to the P100+ to capture and save this important information.

 


  • Measures common-mode noise
  • Latches spikes (impulses)
  • Latches high frequency noise
  • Trips on Surges and Sags
  • Latches Power failures, and Dropouts
  • Determines if the outlet is wired properly
  • Detects power problems quickly and economically

Communications Software Included!


Provided with the Probe 100+ Datalogging is the Probe Communications Software. This software facilitates the accumulation of the AC line voltage and Disturbances as they are broadcast by the Probe 100+. These can then be plotted or stored on the PC for future analysis. The software is capable of generating voltage DATALOG charts and disturbance PIE CHARTS from the received data.

The PROBE continuously monitors the line for high or low AC line voltage conditions. It's simple to operate, plug it in, and press the Reset button. Periodically check the LEDs. The Probe stores events until reset by the operator or power is removed!

The Probe 100 is useful in identifying types of power disturbances that are on the 110/120 volt AC line. It is like taking a snapshot of specific power problems. If you are having a problem with a computer system or peripheral, the Probe can be plugged into the same circuit and left for a period of time. When a problem is experienced with the equipment, immediate checking of the Probe's LEDs will indicate the worst case power problem. If none of the LEDs are illuminated then the problem may be with the hardware. The LEDs that are illuminated indicate the types of disturbances that may be affecting the equipment. The LEDs on the Probe "latch" in the ON position when the device receives a disturbance.

Price $199.95  - on sale at $149.95